Feedback

Please help us improve our service by completing a short survey based on your experience of the Canon Support website.



Complete the survey Topic

No, thank you Topic

Do not show again

PIXMA MG5350

Find FAQs

Print  Print this information

PIXMA MG5350

PIXMA MG5350

FAQ ID: 8201136600
Release date: 02-Aug-11


FAQ: Cannot Install the MP Drivers

Helpful Information:

Solution:


If the installation does not start even after the Setup CD-ROM is inserted into your computer's disc drive:

Start the installation following the procedure below.
1. Select items from the [ Start ] menu as shown below.

  • In Windows 7 or Windows Vista, click [ Start ] then [ Computer ].
  • In Windows XP, click [ Start ] then [ My Computer ].

2. Double-click the [ CD-ROM ] icon on the displayed window.
If the contents of the CD-ROM are displayed, double-click [ MSETUP4.EXE ].

REFERENCE
  • If the CD-ROM icon is not displayed, try the following:

- Remove the CD-ROM from your computer, then insert it again.
- Restart your computer.
  • If the icon is still not displayed, try different discs and see if they are displayed. If other discs are displayed, there is a problem with the Setup CD-ROM. In this case, contact the service center.

If you are unable to proceed beyond the Printer Connection screen:


If you are unable to proceed beyond the Printer Connection screen, make sure that the USB cable is securely plugged into the USB port of the machine and is connected to the computer, and then follow the procedure below to reinstall the MP Drivers.


REFERENCE
  • The printer is not detected. Check the connection. may be displayed depending on the computer you use. In this case, follow the procedure below to reinstall the MP Drivers.

1. Click Cancel.
2. Click Start Over on the Installation Failure screen.
3. Click Exit on the "PIXMA XXX" screen (where "XXX" is your machine's name), then remove the CD-ROM.
4. Turn the machine off.
5. Restart the computer.
6. Make sure that you have no application software running.
7. Insert the CD-ROM again, then install the MP Drivers.

In other cases:

Reinstall the MP Drivers.
If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and then reinstall the MP Drivers.
-> [ Deleting the Unnecessary MP Drivers ]
If you reinstall the MP Drivers, install the MP Drivers on the Setup CD-ROM.


REFERENCE

  • If the installer was forced to be terminated due to a Windows error, the system may be in an unstable condition and you may not be able to install the drivers. Restart your computer before reinstalling.


REFERENCE

  • If the CD-ROM icon is not displayed, try the following:


- Remove the CD-ROM from your computer, then insert it again.
- Restart your computer.
  • If the icon is still not displayed, try different discs and see if they are displayed. If other discs are displayed, there is a problem with the Setup CD-ROM. In this case, contact the service center.

Click here to view all applicable modelsClick here to close the applicable models list

Did this article answer your question?