Feedback

Please help us improve our service by completing a short survey based on your experience of the Canon Support website.



Complete the survey Topic

No, thank you Topic

Do not show again

CanoScan LiDE 25

Find FAQs

Print  Print this information

CanoScan LiDE 25

CanoScan LiDE 25

FAQ ID: 59209
Release date: 10-Jun-10


FAQ: Which Scanners support Windows Vista?

Helpful Information:

Solution:


Windows Vista compatibility overview:

Please click on the model name to find more details about installing the software for Windows Vista.

Fully compatible
CanoScan LiDE 90
CanoScan 8800F
Compatible with 32-bit version only
Compatibility to be confirmed
Not compatible

This section applies to the products listed below. These can be used with Windows Vista.
To use it with Windows Vista, install the software for Windows Vista.

Applicable models:
CanoScan LiDE 25, CanoScan LiDE 600F, CanoScan LiDE 70, CanoScan 4400F, CanoScan 8600F


[Software for Windows Vista]

  • How to confirm the types of software CD-ROM
    The supporting software versions vary depending on the type of software CD-ROM. To distinguish the type of your CD-ROM (A / B / C), check the descriptions of [ 1 ] and [ 2 ]. (Refer to the illustrations below.)
    (The illustration below shows the LiDE 70. The model name and background color vary depending on the model. )

    The description of [ 1 ]:
    CD-ROM A: The model name you are using
    CD-ROM B: "Setup CD-ROM for Microsoft Windows Vista"
    CD-ROM C: The model name you are using
    The description of [ 2 ]:
    CD-ROM A: 2.0 or later
    CD-ROM B: 1.x
    CD-ROM C: 1.x





  • Scanner Driver / Toolbox
    • If you have the CD-ROM A:
      You can install the software that supports both versions of Windows Vista (32 bit / 64 bit).
    • If you have the CD-ROM B:
      You can install the software for Windows Vista 32 bit version.
      However, you can download/install the software for Windows Vista 64 bit version from the Software Download Center.
    • If you have only the CD-ROM C, or you do not have any CD-ROMs:
      Download/install the software each for Windows Vista 32 bit / 64 bit from the Software Download Center.
      (Memo)

  • Page Manager / PhotoStudio / RosettaStone / SilverFast
    NOTE: The manufacturers do not guarantee the operation under Windows Vista.
    (Memo) The software you can use varies depending on your computer's system specifications.


    • If you have the CD-ROM A:
      After installing the software from the CD-ROM, confirm Windows Vista support in each application manufacturer's website and follow the instruction they provide.
    • If you have the CD-ROM C:
      After installing the software from the CD-ROM, confirm Windows Vista support in each application manufacturer's website and follow the instruction they provide.
    • If you have only the CD-ROM B, or you do not have any CD-ROMs:
      If the software has already been installed, confirm Windows Vista support in each application manufacturer's website and follow the instruction they provide.

      Application NameWebpage URL
      ArcSoft Photostudiohttp://www.arcsoft.com/
      NewSoft Presto!PageManagerhttp://global.newsoftinc.com/
      RosettaStonehttp://www.canon-ib.com.cn/
      SilverFasthttp://www.silverfast.com/

  • OmniPage SE
    • If you have the CD-ROM A:
      After installing OmniPage SE from the CD-ROM, confirm Windows Vista support in the application manufacturer's website and follow the instruction they provide.
    • If you have the CD-ROM C:
      Confirm Windows Vista support in the application manufacturer's website and follow the instruction they provide.
      NOTE: Do not install the OmniPage SE from the software CD-ROM.
    • If you have only the CD-ROM B, or you do not have any CD-ROMs:
      OmniPage SE cannot be installed from the CD-ROM B.

      Application NameWebpage URL
      Nuance OmniPage SEhttp://www.nuance.com/
[From where you can download the software?]

The software for Windows Vista 32 bit / 64 bit, can be downloaded from our Software Download Center.Please click here to download the software.

[NOTE]

To use this machine with a computer upgraded from Windows XP to Windows Vista, be sure to uninstall all Canon scanner software (ScanGear or scanner driver, application software, etc.) before upgrading to Windows Vista.

Back to Top


This section applies to the products listed below. These can be used with Windows Vista.
To use it with Windows Vista, install the software for Windows Vista.

Applicable models:
CanoScan 9950F


[Software for Windows Vista]

  • How to confirm the types of software CD-ROM
    The supporting software versions vary depending on the type of software CD-ROM.
    To distinguish the type of your CD-ROM (A / B), check the descriptions of [ 1 ] and [ 2 ]. (Refer to the illustrations below.)
    (The illustration below shows the LiDE 70. The model name and background color vary depending on the model. )

    The description of [ 1 ]:
    CD-ROM A: "Setup CD-ROM for Microsoft Windows Vista"
    CD-ROM B: The model name you are using
    The description of [ 2 ]:
    CD-ROM A: 1.x
    CD-ROM B: 1.x




  • Scanner Driver / Toolbox
    • If you have the CD-ROM A:
      You can install the software for Windows Vista 32 bit version.
      However, you can download the software for Windows Vista 64 bit version from the Software Download Center.
    • If you have only the CD-ROM B, or you do not have any CD-ROMs:
      You can download the software that supports both versions of Windows Vista (32 bit / 64 bit) from the Software Download Center.
      (Memo)

  • Page Manager / PhotoStudio / RosettaStone / SilverFast
    NOTE: The manufacturers do not guarantee the operation under Windows Vista.
    (Memo) The software you can use varies depending on your computer's system specifications.


    • If you have only the CD-ROM A, or you do not have any CD-ROMs:
      If the software has already been installed, confirm Windows Vista support in each application manufacturer's website and follow the instruction they provide.
    • If you have the CD-ROM B:
      After installing the software from the CD-ROM, confirm Windows Vista support in each application manufacturer's website and follow the instruction they provide.

      Application NameWebpage URL
      ArcSoft Photostudiohttp://www.arcsoft.com/
      NewSoft Presto!PageManagerhttp://global.newsoftinc.com/
      RosettaStonehttp://www.canon-ib.com.cn/
      SilverFasthttp://www.silverfast.com/

  • OmniPage SE
    Confirm the Windows Vista support in the Nuance website, then follow the instruction it provides.
    NOTE: Do not install the OmniPage SE from the software CD-ROM.


  • Application NameWebpage URL
    Nuance OmniPage SEhttp://www.nuance.com/
[From where you can download the software?]

The software for Windows Vista 32 bit / 64 bit, can be downloaded from our Software Download Center.Please click here to download the software.

[NOTE]

To use this machine with a computer upgraded from Windows XP to Windows Vista, be sure to uninstall all Canon scanner software (ScanGear or scanner driver, application software, etc.) before upgrading to Windows Vista.

Back to Top

This section applies to the products listed below. These can be used with Windows Vista.
To use it with Windows Vista, install the software for Windows Vista.

Applicable models:
CanoScan 4200F

[Software for Windows Vista]


  • Scanner Driver / Toolbox
    The Windows Vista software can be downloaded from theSoftware Download Center.

  • Page Manager / PhotoStudio / RosettaStone / SilverFast
    NOTE: The manufacturers do not guarantee the operation under Windows Vista.
    (Memo)


    • If you have the CD-ROM:
      After installing the software from the CD-ROM, confirm Windows Vista support in each application manufacturer's website and follow the instruction they provide.
    • If you do not have the CD-ROM:
      If the software has already been installed, confirm Windows Vista support in each application manufacturer's website and follow the instruction they provide.

      Application NameHomepage
      ArcSoft Photostudiohttp://www.arcsoft.com/
      NewSoft Presto!PageManagerhttp://global.newsoftinc.com/
      RosettaStonehttp://www.canon-ib.com.cn/
      SilverFasthttp://www.silverfast.com/

  • OmniPage SE
    • If you have the CD-ROM:
      Confirm Windows Vista support in the application manufacturer's website, then follow the instruction they provide.
      NOTE: The manufacturer does not guarantee the operation under Windows Vista.


    • Application NameWebpage URL
      Nuance OmniPage SEhttp://www.nuance.com/
[From where you can download the software?]

The software for Windows Vista 32 bit / 64 bit, can be downloaded from our Software Download Center.Please click here to download the software.

[NOTE]

To use this machine with a computer upgraded from Windows XP to Windows Vista, be sure to uninstall all Canon scanner software (ScanGear or scanner driver, application software, etc.) before upgrading to Windows Vista.

Back to Top

This section applies to the products listed below. These canonlybe used with Windows Vista 32 bit version.
(These products do not support Windows Vista 64 bit version.)

Applicable models:
N1240U, N670U/676U, D660U, CanoScan 5000/5000F, CanoScan 9900F, CanoScan 8000F, CanoScan 3200/3200F, CanoScan LiDE 30, CanoScan LiDE 50, CanoScan LiDE 80, CanoScan LiDE 35, CanoScan LiDE 20


[Software for Windows Vista]

  • ScanGear (scanner driver)
    You can use the ScanGear for Windows XP as the one for Windows Vista 32 bit version.
    ScanGear does not support the Windows Vista 64 bit version.
    (Memo)

  • Toolbox
    Toolbox can be downloaded from the Software Download Center.

  • Page Manager / PhotoStudio / RosettaStone / SilverFast
    NOTE: The manufacturers do not guarantee the operation under Windows Vista.
    (Memo) The software you can use varies depending on your computer's system specifications.


    • If you have the CD-ROM:
      After installing the software from the CD-ROM, confirm Windows Vista support in each application manufacturer's website and follow the instruction they provide.
    • If you do not have the CD-ROM:
      If the software has already been installed, confirm Windows Vista support in each application manufacturer's website and follow the instruction they provide.

      Application NameWebpage URL
      ArcSoft Photostudiohttp://www.arcsoft.com/
      NewSoft Presto!PageManagerhttp://global.newsoftinc.com/
      RosettaStonehttp://www.canon-ib.com.cn/
      SilverFasthttp://www.silverfast.com/

  • OmniPage SE
    • If you have the CD-ROM:
      Confirm Windows Vista support in the application manufacturer's website, then follow the instructions they provide.
      NOTE: Do not install the OmniPage SE from the software CD-ROM.


    • Application NameWebpage URL
      Nuance OmniPage SEhttp://www.nuance.com/
[From where you can download the software?]

The software for Windows Vista 32 bit / 64 bit, can be downloaded from our Software Download Center.Please click here to download the software.

[NOTE]

To use this product with a computer upgraded from Windows XP to Windows Vista, be sure to uninstall all Canon scanner software (ScanGear or scanner driver, application software, etc.) before upgrading to Windows Vista.

Back to Top


This section applies to the products listed below. These can be used with Windows Vista.
To use it with Windows Vista, install the software for Windows Vista.

Applicable models:
CanoScan D1230/ D1230UF, CanoScan D2400U/ D2400UF, CanoScan D1250U2/ D1250U2F


[Software for Windows Vista]

  • ScanGear (scanner driver)
    The software for Windows Vista 32 bit, can be downloaded from our Software Download Center.
    ScanGear does not support the Windows Vista 64 bit version.
    (Memo)

  • Toolbox
    You can use the Toolbox for Windows XP as the one for Windows Vista.

  • Page Manager / PhotoStudio / RosettaStone / SilverFast
    NOTE: The manufacturers do not guarantee the operation under Windows Vista.
    (Memo) The software you can use varies depending on the machine you are using.


    • If you have the CD-ROM:
      After installing the software from the CD-ROM, confirm if Windows Vista is supported in each application manufacturer's website, then follow the instruction they provide.
    • If you do not have the CD-ROM:
      If the software has already been installed, confirm Windows Vista support in each application manufacturer's website and follow the instruction they provide.

      Application NameWebpage URL
      ArcSoft Photostudiohttp://www.arcsoft.com/
      NewSoft Presto!PageManagerhttp://global.newsoftinc.com/
      RosettaStonehttp://www.canon-ib.com.cn/
      SilverFasthttp://www.silverfast.com/

  • OmniPage SE
    • If you have the CD-ROM:
      Confirm if Windows Vista is supported in the application manufacturer's website, then follow the instructions it provides.
      NOTE: Do not install the OmniPage SE from the software CD-ROM.


    • Application NameWebpage URL
      Nuance OmniPage SEhttp://www.nuance.com/
[From where you can download the software?]

The software for Windows Vista 32 bit / 64 bit, can be downloaded from our Software Download Center.Please click here to download the software.

[NOTE]

To use this machine with a computer upgraded from Windows XP to Windows Vista, be sure to uninstall all Canon scanner software (ScanGear or scanner driver, application software, etc.) before upgrading to Windows Vista.

Back to Top


This section applies to the products listed below. These can be used with Windows Vista.
To use it with Windows Vista, install the software for Windows Vista.

Applicable models:
CanoScan D660U

[Software for Windows Vista]

  • ScanGear (scanner driver)
    You can use the ScanGear for Windows XP as the one for Windows Vista 32 bit version.
    ScanGear does not support the Windows Vista 64 bit version.
    (Memo)

  • Toolbox
    You can use the Toolbox for Windows XP as the one for Windows Vista.

  • Page Manager / PhotoStudio / RosettaStone / SilverFast
    NOTE: The manufacturers do not guarantee the operation under Windows Vista.
    (Memo) The software you can use varies depending on the machine you are using.


    • If you have the CD-ROM:
      After installing the software from the CD-ROM, confirm if Windows Vista is supported in each application manufacturer's website, then follow the instructions they provide.
    • If you do not have the CD-ROM:
      If the software has already been installed, confirm if Windows Vista is supported in each application manufacturer's website, then follow the instructions they provide.

      Application NameWebpage URL
      ArcSoft Photostudiohttp://www.arcsoft.com/
      NewSoft Presto!PageManagerhttp://global.newsoftinc.com/
      RosettaStonehttp://www.canon-ib.com.cn/
      SilverFasthttp://www.silverfast.com/

  • OmniPage SE
    • If you have the CD-ROM:
      After installing OmniPage SE from the CD-ROM, confirm if Windows Vista is supported in the application manufacturer's website, then follow the instructions it provides.
      Application NameWebpage URL
      Nuance OmniPage SEhttp://www.nuance.com/
[From where you can download the software?]

The software for Windows Vista 32 bit / 64 bit, can be downloaded from our Software Download Center.Please click here to download the software.

[NOTE]

To use this machine with a computer upgraded from Windows XP to Windows Vista, be sure to uninstall all Canon scanner software (ScanGear or scanner driver, application software, etc.) before upgrading to Windows Vista.

Back to Top


This section applies to the products listed below. These can be used with Windows Vista. To use it with Windows Vista, install the software for Windows Vista.

Applicable models:
CanoScan 3000/ 3000F/ 3000ex

[Software for Windows Vista]

  • ScanGear (scanner driver)
    ScanGear can be downloaded from our Software Download Center.
    ScanGear does not support the Windows Vista 64 bit version.
    (Memo)

  • Toolbox
    Toolbox can be downloaded from our Software Download Center.

  • Page Manager / PhotoStudio / RosettaStone / SilverFast
    NOTE: The manufacturers do not guarantee the operation under Windows Vista.
    (Memo) The software you can use varies depending on the machine you are using.


    • If you have the CD-ROM:
      After installing the software from the CD-ROM, confirm if Windows Vista is supported in each application manufacturer's website, then follow the instructions they provide.
    • If you do not have the CD-ROM:
      If the software has already been installed, confirm if Windows Vista is supported in each application manufacturer's website, then follow the instructions they provide.

      Application NameWebpage URL
      ArcSoft Photostudiohttp://www.arcsoft.com/
      NewSoft Presto!PageManagerhttp://global.newsoftinc.com/
      RosettaStonehttp://www.canon-ib.com.cn/
      SilverFasthttp://www.silverfast.com/

  • OmniPage SE
    • If you have the CD-ROM:
      After installing OmniPage SE from the CD-ROM, confirm if Windows Vista is supported in the application manufacturer's website, then follow the instructions it provides.
      Application NameWebpage URL
      Nuance OmniPage SEhttp://www.nuance.com/
[From where you can download the software?]

The software for Windows Vista 32 bit / 64 bit, can be downloaded from our Software Download Center.Please click here to download the software.

[NOTE]

To use this machine with a computer upgraded from Windows XP to Windows Vista, be sure to uninstall all Canon scanner software (ScanGear or scanner driver, application software, etc.) before upgrading to Windows Vista.

Back to Top


This section applies to the products listed below. These can be used with Windows Vista. To use it with Windows Vista, install the software for Windows Vista.

Applicable models:
CanoScan 8400F, CanoScan 5200F, CanoScan LiDE 500F, CanoScan LiDE 60

[Software for Windows Vista]

  • ScanGear (scanner driver)
    • Windows Vista 32 bit version
      You can use the ScanGear for Windows XP as the one for Windows Vista 32 bit version.
    • Windows Vista 64 bit version
      ScanGear can be downloaded from our Software Download Center.
    (Memo)

  • Toolbox
    Toolbox can be downloaded from our Software Download Center.

  • Page Manager / PhotoStudio / RosettaStone / SilverFast
    NOTE: The manufacturers do not guarantee the operation under Windows Vista.
    (Memo) The software you can use varies depending on the machine you are using.


    • If you have the CD-ROM:
      After installing the software from the CD-ROM, confirm if Windows Vista is supported in each application manufacturer's website, then follow the instructions they provide.
    • If you do not have the CD-ROM:
      If the software has already been installed, confirm if Windows Vista is supported in each application manufacturer's website, then follow the instructions they provide.

      Application NameWebpage URL
      ArcSoft Photostudiohttp://www.arcsoft.com/
      NewSoft Presto!PageManagerhttp://global.newsoftinc.com/
      RosettaStonehttp://www.canon-ib.com.cn/
      SilverFasthttp://www.silverfast.com/

  • OmniPage SE
    • If you have the CD-ROM:
      After installing OmniPage SE from the CD-ROM, confirm if Windows Vista is supported in the application manufacturer's website, then follow the instructions it provides.
      Application NameWebpage URL
      Nuance OmniPage SEhttp://www.nuance.com/
[From where you can download the software?]

The software for Windows Vista 32 bit / 64 bit, can be downloaded from our Software Download Center.Please click here to download the software.

[NOTE]

To use this machine with a computer upgraded from Windows XP to Windows Vista, be sure to uninstall all Canon scanner software (ScanGear or scanner driver, application software, etc.) before upgrading to Windows Vista.

Back to Top


This section applies to the products listed below. Compatibility with Windows Vista has not yet been confirmed.

Applicable models:
FS4000US

Canon and Microsoft are currently confirming the compatibility with Windows Vista.

Back to Top


This section applies to the products listed below. These products arenotcompatible with Windows Vista.


Applicable models:
CanoScan N640Pex, CanoScan FB620S, CanoScan FB630U/636U/630Ui, CanoScan FB1210U, CanoScan N650U/656U, CanoScan N1220U, CanoScan 300(DX), CanoScan 600(DX), CanoScan FB1200s, CanoScan 2700F, CanoScan FS2710, CanoScan FB320P, CanoScan FB620P, CanoScan FB300P, CanoScan FB630P, CanoScan N340P, CanoScan N640P, CanoScan FB320P, CanoScan FB520U, CanoScan D646U, CanoScan LiDE 35

Due to product specifications, the above models cannot be used with Windows Vista

Back to Top

Click here to view all applicable modelsClick here to close the applicable models list

Did this article answer your question?