FAQ ID: 8202243800
Release date: 19 January 2015
Ver.1.050
1. The administrator password has become to be settable for the Remote UI.
(A) Internet
(B) Access point or router
(C) PC or PDA such as a smartphone
(D) Printer
(1) Confirm that the printer is turned on.
(2) Confirm that the printer is connected to the Internet.
(3) Load one sheet of A4 size or Letter size plain paper.
(4) Press and hold the Stop button until the Alarm lamp blinks 6 times, then release the button.
Printing of the network setup information starts.
(5) Open the web browser of your PC, smartphone, or other types of PDA. In the address entry box of the browser, enter the text that you see on the printout in the "IPv4 IP Address" line.
For example, with the printout shown above, enter "http://192.168.11.3" in the box.
(6) The Remote UI starts and the top window is displayed.
(7) Select [Firmware update] and [Install update].
(8) When "Update succeeded" is displayed, select OK.
Update of the firmware is completed.
(1) Confirm that the printer is turned on.
(2) Confirm that the printer is connected to the Internet.
(3) Click [Windows Explorer] on the taskbar.
(4) In the window, click [Network]. The iP8700 series icon (iP8700 series_xxxx) is displayed.
(5) Right-click on the iP8700 series icon (iP8700 series_xxxx), select [View device webpage] from the menu.
(6) The Remote UI starts and the top window is displayed.
(7) Select [Firmware update] and [Install update].
(8) When "Update succeeded" is displayed, select OK.
Update of the firmware is completed.
(1) Confirm that the printer is turned on.
(2) Confirm that the printer is connected to the Internet.
(3) Start Safari (browser).
(4) From the File menu, select [Safari] and [Preferences...]. The General window will open. Select [Bookmark] or [Advanced].
(5) The window below will open. Select [Include Bonjour] for Bookmarks bar or [Include Bonjour in the Favorites bar] for Bonjour.
(6) In the Favorites bar, click [Bonjour], and select [Canon iP8700 series] from the menu.
(7) The Remote UI starts and the top window is displayed.
(8) Select [Firmware update] and [Install update].
(9) When "Update succeeded" is displayed, select OK.
Update of the firmware is completed.