For the Stack Bypass Tray

You can register a frequently used paper size and type for the stack bypass tray.
The default setting is <Off>.

1. Press (Main Menu).

2. Press the right Any key to select <Additional Func.>.

3. Use [ ] , [ ] or (Scroll Wheel) to select <Paper Settings>, then press [OK].

4. Use [ ] , [ ] or (Scroll Wheel) to select <Stack Bypass Paper (Std.)>, then press [OK].

5. Use [ ] , [ ] or (Scroll Wheel) to select <On>, then press the right Any key to select <Option>.

If you do not want to set the stack bypass standard settings, select <Off>, then press [OK], and press (Main Menu) to return to the Main Menu screen.

If you register a standard paper size:

1 Use [ ] , [ ] or (Scroll Wheel) to select paper size, then press [OK].

• You can select from the following paper sizes:

• If you use inch size paper, press the left Any key to select <Inch Size> and select the paper size you want to use.

If you register an irregular paper size:

1. Use [ ] , [ ] or (Scroll Wheel) to select <Custom Size>, then press [OK].

2. Use [ ] , [ ] or (Scroll Wheel) to select <X:> (length for the short edge), then press [OK].

3. Use [ ] , [ ], (Scroll Wheel) or - (numeric keys) to enter the length for X (short edge), then press [OK].

4. Use [ ] , [ ] or (Scroll Wheel) to select <Y:> (length for the long edge), then press [OK].

5. Use [ ] , [ ], (Scroll Wheel) or - (numeric keys) to enter the length for Y (long edge), then press [OK].

6. Use [ ] , [ ] or (Scroll Wheel) to select <Set Size>, then press [OK].

If you register an irregular paper size by recalling the previously set size:

You can recall the previously set paper size.

1. Use [ ] , [ ] or (Scroll Wheel) to select <Custom Size>, then press [OK].

2. Press the right Any key to select <Recall/Register>.

3. Use [ ] , [ ] or (Scroll Wheel) to select <Size 1> or <Size 2>, then press [OK].

The recalled paper size is displayed.

4. Use [ ] , [ ] or (Scroll Wheel) to select <Set Size>, then press [OK].

6. Use [ ] , [ ] or (Scroll Wheel) to select paper type, then press [OK].

The selectable paper types vary depending on the paper size you have specified. The unavailable paper types are grayed out on the display.

7. Use [ ] , [ ] or (Scroll Wheel) to select <On>, then press [OK].

8. Press right Any key to select [Done].

9. Press (Main Menu) to return to the Main Menu screen.

For the Paper Drawer

When you place other sizes and/or types of paper, follow this procedure to change the settings.
The default settings are <A4> and <Plain 2>.

1. Press (Main Menu).

2. Press the right Any key to select <Additional Func.>.

3. Use [ ] , [ ] or (Scroll Wheel) to select <Paper Settings>, then press [OK].

4. Use [ ] , [ ] or (Scroll Wheel) to select <Drawer 1> or <Drawer 2>*, then press [OK].

*Only when the optional Paper Drawer (Paper Drawer 2) is attached.

5. Use [ ] , [ ] or (Scroll Wheel) to select paper size, then press [OK].

• You can select from the following paper sizes:

• If you use inch size paper, press the right Any key to select <Inch Size> and perform the step above.

6. Use [ ] , [ ] or (Scroll Wheel) to select paper type, then press [OK].

• You can select from the following paper types:

• If you use the paper drawer 2*, repeat the steps 4 to 6 for the paper drawer 2*.

7. Press (Main Menu) to return to the Main Menu screen.

• i-SENSYS MF9220Cdn
• i-SENSYS MF9280Cdn