MAXIFY iB4040 Default

MB5340 Setup and Troubleshooting Videos

These video FAQ's provide detailed, step by step instructions which are specific to your product and have been created to guide you through the most common setup tasks required to prepare your MAXIFY product. There are also some helpful troubleshooting videos which guide you through some of the most common printing problems you may encounter when using your product.

Setting up your device

Setting up the printer

This video shows you how to set up the printer from the box and includes removing the protective packaging and connecting the device ready for use.

Installing the ink tanks

This video shows you how to correctly prepare and install the ink cartridges into your device.

Load paper

This video shows you how to load paper into your device.

Load paper (5x7 or smaller)

This video shows you how to load paper into your device.

Troubleshooting

Cleaning the print head nozzles

This video shows you how to check the print head nozzles and perform a cleaning operation if necessary.

Performing manual print head alignment

If your prints are not correctly aligned, this video will show you how to resolve this issue by performing a manual print head alignment.

Perform automatic print head alignment

If your prints are not correctly aligned, this video will show you how to resolve this issue by performing the automatic head alignment function.

Remove paper jam from inside the printer

This video shows you how to remove a paper jam from inside the printer unit if necessary.

Remove paper jam from the rear of the printer

This video shows you how to safely remove jammed paper from the rear of your device.

Cleaning inside of the printer

This video shows you how to clean the inside of the printer if ink transfer is affecting your print quality.

These movie files are using OSS as detailed below:

jquery-1.4.2.min.js and jquery-ui-1.8.2.custom.min.js

You might also need...

Feedback